Two Seater Bench

Garden Bench Assembly Guide for Dummies

Two Seater Bench



To make the bench assemble four pieces of the following dimensions from the cutting list, two pieces 16”x 4”, one piece 10”x4” and one piece 10”x2”:-


Using the thickness of one of the pieces of wood as a guide, assemble the pieces in the way shown. Use a pencil to mark the positions of the pieces:-


Three of these assemblies are required, but the middle section needs a little carpentry to make it fit and a saw and chisel are required to carry out the work:-



Eventually after all these carpentry manipulations you should end up with the following three assemblies:-


If you’re not very good with a chisel then you can do the following alternative assembly for the middle section:-



Join the three assemblies with four cross pieces two pieces, 850 x 50x 25 and two pieces, 850 x 100 x 25:-



Finally secures the slats to the top of the bench with 1½” (32mm) screws. Five pieces 900 x 50 x 25 will complete the job.